油霧回收機
  近年來,工商業發達,工作母機增加迅速,國民所得提高,
相對要求要有一個舒適的工作環境。而一般加工機所產生之油霧
,長時間吸入體內後輕則可能誘發慢性眼科疾病、皮膚油疹,重
則會導致肺臟、肝臟、喉癌....等病變,因此,鄭重推薦您使用台
灣秀和油霧回收機,來提高工作效率,並創造一個舒適的工作環
境,為明日之健康邁進。
 
Drain out oil / MIST and the inside of plant will be kept clean.
Improve the working envoronment to bring mark-ed working efficiency.
The oil / MIST produced during cutting can be recollected completly.
Produce the great efficiency for the improvement on envoronment, maintenance of machinery and saving energy.

    

SH-10


 

規 格 / SPECIFICATIONS
出力
Output
0.75 kw
電壓
Voltage
220V、3相(phases)、60Hz、50Hz
380V、3相(phases)、60Hz、50Hz
吸入徑
Absorb radius
125ø、150ø
風量
Fanning velocity
16m / min
噪音值
≥60db
靜壓
Still pressure
210 mAg
尺寸
Measurement
長(L)535 x 寬(H)435 x 高(W)575
重量 Weight
35 kg

  


SD-10


規 格 / SPECIFICATIONS

出力
Output
0.75 kw
電壓
Voltage
220V、3相(phases)、60Hz、50Hz
380V、3相(phases)、60Hz、50Hz
吸入徑
Absorb radius
125ø、150ø
風量
Fanning velocity
16m/min
噪音值
≥60db
靜壓
Still pressure
210 mAg
尺寸 Measurement
長(L)485 x 寬(H)365 x 高(W)480
重量 Weight
32 kg

  

SH-20

規 格/ SPECIFICATIONS
出力
Output
1.5 kw
電壓
Voltage
220V、3相(phases)、60Hz、50Hz
380V、3相(phases)、60Hz、50Hz
吸入徑
Absorb radius
200ø
風量
Fanning velocity
19m / min
噪音值
≥62db
靜壓
Still pressure
210 mAg
尺寸 Measurement
長(L)650 x 寬(H)460 x 高(W)600
重量 Weight
53 kg

油霧回收機之優點
The meritable points of oil / MIST COLLECT recollecting machine



1.特殊過濾裝置 - Special filter device
0.3µ / m微粒子高性能過濾網四層以上,可過濾99.9%以上之油霧,並經過濾後可回收再生使用。
Over four layers of 0.3U/m micro-particle high-formance filter screens work to screen more than 99.9% of oil and misT .And after screening, it can be resume back for another round of use.
 
2.高效率設計 - High efficiency device
風扇經電腦平衡校正,風量大,離心式設計,過濾布不含油,可長時間使用。
The fan is adjustable through computer balance to provide stronger wind and more durable time of use.
 
3.運轉噪音低 - Lower noise of operation
使用交流馬達,馬達裝置在主體中間,運轉噪音低,在 70dBA以下。
Use alternating motor.The motor is installed in middle part of machine to lower down the noise when the machine is under operation ,the noise is usually kept under 70dbA.
 
4.節約能源 - Energy saving
一般CNC工作母機在工廠內都有中央空調系統加裝油霧回收機後,冷房效困更佳,冷氣不外洩並可保障CNC工作母機各部份線路以免誤動作、停機.提高工作效率。
Ordinary CNC working machines are installed in the factory,and the cool-ing system can provide stronger cooling effect after adding oil / MIST recollecting machine together with the central controled air-conditioner system. Besides, the cool air would not leak to protect various parts of cord of CNC wording machine, so as to avoid mistakes or machine ceases to operate to promote working efficiency.
 
5.適用對象 - Applicable targets
CNC車床、CNC綜合切削加工機等,放電加工機、滾齒機、磨床、螺絲打頭機、搓牙機、洗淨槽作業、防蛌o噴霧回收處理(沖壓元件防袕B理)等。
Applicable to machines like CNC lathe machine, CNC
integrated cut-ting/processing machines, electricity-release processing machin, gearmachie, grinding machine, screw head pumping machine, gear-filing machine, basin cleaning opertion, the processing of oil/MIST recollect and anti-rust, as well as anti-rust treatment of pressing parts...etc.

最新NC成型加工機


加工範圍
加工板圓直徑
最大1000
最小 50
板厚皮鐵板
4.0mm以下
鋁板
8.0mm以下
不袗板
2.5mm 以下
※旋壓機特色可不限數量及種類多寡,均可代客加工!

台灣秀和有限公司Taiwan Hsiu Ho Co., Ltd.
台北縣新莊市化成路43巷100號
Tel: 02-2997-5419 Fax:02-2276-7697
E-mail: shiuho@ms77.hinet.net
Copyright(c)2003,Taiwan Hsiu Ho Co., Ltd. All rights reserved.