電話

08-7760286

傳真

08-7760279

公司簡介
Introduction

  近年來,工商業發達,工作母機增加迅速,國民所得提高,相對要求要有一個舒適的工作環境。而一般加工機所產生之油霧 ,長時間吸入體內後輕則可能誘發慢性眼科疾病、皮膚油疹,重則會導致肺臟、肝臟、喉癌....等病變,因此,鄭重推薦您使用台灣秀和油霧回收機,來提高工作效率,並創造一個舒適的工作環境,為明日之健康邁進。

  台灣秀和有限公司成立於民國73年,起先代理日本秀和株式會社吸塵器等產品,進而技術轉移,至今全面自行生產已近30餘年。感謝工作母機業界的大力推薦,使我們的油霧回收機 SH-10 跟隨他們的機器行銷各國,目前與我們長期配合的知名廠商有:台中精機、台灣日立、台灣麗馳、東台精機、永進機械、喬福機械、東培工業、福裕、福聯、鼎維..等十數家,國內市場佔有率極高,氣壓式吸塵器V-500更為國內獨一產品,而KV-950-2工業用吸塵器4HP超強的吸力更深獲模具界青睞。 

  精益求精,共體時局,是我們的經營本質與信念,歡迎各界先進賢達不吝指教。

  • Drain out oil / MIST and the inside of plant will be kept clean.
  • Improve the working envoronment to bring mark-ed working efficiency.
  • The oil / MIST produced during cutting can be recollected completly.
  • Produce the great efficiency for the improvement on envoronment, maintenance of machinery and saving energy.

油霧回收機之優點
The meritable points of oil / MIST COLLECT recollecting machine

特殊過濾裝置 -
SPECIAL FILTER DEVICE

0.3µ / m微粒子高性能過濾網四層以上,可過濾99.9%以上之油霧,並經過濾後可回收再生使用


Over four layers of 0.3U/m micro-particle high-formance filter screens work to screen more than 99.9% of oil and misT .And after screening, it can be resume back for another round of use.

高效率設計 -
High efficiency device

風扇經電腦平衡校正,風量大,離心式設計,過濾布不含油,可長時間使用


The fan is adjustable through computer balance to provide stronger wind and more durable time of use.

運轉噪音低 -
Lower noise of operation

使用交流馬達,馬達裝置在主體中間,運轉噪音低,在 70dBA以下


Use alternating motor.The motor is installed in middle part of machine to lower down the noise when the machine is under operation ,the noise is usually kept under 70dbA.

節約能源 -
Energy saving

一般CNC工作母機在工廠內都有中央空調系統加裝油霧回收機後,冷房效困更佳,冷氣不外洩並可保障CNC工作母機各部份線路以免誤動作、停機.提高工作效率


Ordinary CNC working machines are installed in the factory,and the cool-ing system can provide stronger cooling effect after adding oil / MIST recollecting machine together with the central controled air-conditioner system. Besides, the cool air would not leak to protect various parts of cord of CNC wording machine, so as to avoid mistakes or machine ceases to operate to promote working efficiency.

適用對象 -
Applicable targets

CNC車床、CNC綜合切削加工機等,放電加工機、滾齒機、磨床、螺絲打頭機、搓牙機、洗淨槽作業、防銹油噴霧回收處理(沖壓元件防銹處理)等。


Applicable to machines like CNC lathe machine, CNC integrated cut-ting/processing machines, electricity-release processing machin, gearmachie, grinding machine, screw head pumping machine, gear-filing machine, basin cleaning opertion, the processing of oil/MIST recollect and anti-rust, as well as anti-rust treatment of pressing parts...etc.

油霧回收機Mist Collect

出力
Output
0.75 kw
電壓
Voltage
220V、3相(phases)、60Hz、50Hz
380V、3相(phases)、60Hz、50Hz
吸入徑
Absorb radius
125ø、150ø
風量
Fanning velocity
19 m3 / min

靜壓 

Still pressure

210m Aq
噪音值 ≥60db
尺寸
Measurement
長(L)535 x 寬(H)435 x 高(W)575
重量
Weight
35 kg
檔案下載 41890.jpg ,   36159.jpg ,   sh-10現場施工後圖樣 (2).jpg ,   Scan2020-08-03_162018.jpg ,  
介紹影片 檔案名稱
出力
Output
1.5 kw
電壓
Voltage
220V、3相(phases)、60Hz、50Hz
380V、3相(phases)、60Hz、50Hz
吸入徑
Absorb radius
200ø
風量
Fanning velocity
25m3 / min
靜壓 Still pressure 210 m Aq
噪音值 ≥62db
尺寸
Measurement
長(L)650 x 寬(H)460 x 高(W)600
重量
Weight
53 kg
檔案下載 Scan2019-07-19_093306.jpg ,  
介紹影片 檔案名稱

工業用超強力吸塵器系列Industrial super vacuum cleaner series

  • 不生油霧
  • 可清除水、油、灰塵及泥渣
  • 配用於洋鐵桶,以盛渣屑
  • 特殊設計,劃時代產品,價格低廉
  • 移動方便,吸力超群
 
型式 V- 500 , 5馬力
抗油管 32mm x 2m
空氣消耗量 在 6kg /cm2 , 400 l/min
真空吸入量 3立方公尺 (3000mm)
重量 5 kg
檔案下載 V-500 (2).jpg ,   V-500.jpg ,  
介紹影片 檔案名稱
 
img
P-1
  • 不生油霧
  • 可清除水、油、灰塵及泥渣
  • 配用於洋鐵桶,以盛渣屑
  • 特殊設計,劃時代產品,價格低廉
  • 移動方便,吸力超群
 
出力 1.05 Kw
電流 8A
真空度 2300 mmAg
電壓 110 V / 220 V
風量 3m 3 / min
重量 5 kg
檔案下載 64127.jpg ,  
介紹影片 檔案名稱
 
  • 特殊的馬達:採用特製馬達和真空幫浦直結,以每分鐘20100RPM的轉速,配合三次之扇葉產生巨大的真空吸力。並有特殊的整體結構及優異的冷卻系統,而可以長時間連續使用。
  • 多變化之機型:2HP以上之機種,可以裝2個或3個馬達,可增加吸力,在任何場合都能使用。
  • 吸入管:50ø
 
型式 KV-950-3 KV-950-2 KV-950-1
起動馬力 6HP 4HP 2HP
電源 220V 單相 220V or 110V 220V or 110V
電流 8A 10A .15A 5.5A.10A
真空度 3000 mmAg 3000 mmAg 3000 mmAg
風量 11.4m3 / min 7.6m 3 / min 3.8m 3 / min
周波數 60 Hz 60 Hz 60 Hz
容量 60 l 60 l 60 l
重量 35 Kg 32 Kg 26 Kg
噪音 78 dBA 70 dBA 65 dBA
檔案下載 61001.jpg ,  
介紹影片 檔案名稱
 

乾式粉塵的處理方式有多種,其中最有效的離心力分離式和過濾式合併為一體者.
粉塵經過高性能的離心式分離機,作第一次處理(可處理90%以上之粉塵)後,再經第二次過濾之粉塵極少,因此絕無阻塞過濾管之現象。

 

型式尺寸:高*寬*深 / 馬力 入風口 風量 重量
TS100 1250*600*500/ 1HP 100mm 15-20 75
TS200 2000*800*600/ 2HP 150mm 25-35 110
TS300 2000*800*600/ 3HP 200mm 30-45 120
TS500 2200*870*870/ 5HP 250mm 47-65 160
檔案下載 集塵機.jpg ,  
介紹影片 檔案名稱
 

自動化工廠必備之寵物
Automated Factory Essential Equipments

  • 金屬加工業:各種金屬切削片,切削油回收。
  • 汽車保養廠:廢油清除,車內清掃。
  • 工事/工地:使用水泥殘留回收,石膏板切斷時之集塵。
  • 纖維工業:機器週邊綿紗清掃
  • 化學工業:原料回收,輸送等
  • 木工廠:木屑各種三夾板切斷時之集塵。
  • 印刷業:油墨回收,紙粉回收,機器清掃。
  • 餐旅業:室內清掃,空調機等清掃。
  • 食品業:原料或殘片的回收。

聯絡我們
Contact Us

電話:

08-7760286

傳真:

08-7760279

地址:

屏東縣潮州鎮朝昇東路210號4樓.